Carl Alberty ( 5 of 5 )
Typically, they look for at least 100-dB isolation.
Typically, they look for at least 100-dB isolation.
If you are able to decrease the noise level by 6 dB, that's half of what it used to be. read more
If you are able to decrease the noise level by 6 dB, that's half of what it used to be. We've made a 10 dB improvement in dynamic range and total harmonic distortion plus noise (THD+N) performance, compared to the CS3310.
Consequently, the cost per channel can be significantly reduced by using the eight-channel device.
Consequently, the cost per channel can be significantly reduced by using the eight-channel device.
The converter only needs a power supply and some clocks. Feed it some audio analog and the device will do read more
The converter only needs a power supply and some clocks. Feed it some audio analog and the device will do the conversion and output digital audio in the form of I2S or left justified depending on the part.
The CS5343 provides higher performance than the CS5330A/1A yet it is smaller and more cost effective compared to the CS5340/41.
The CS5343 provides higher performance than the CS5330A/1A yet it is smaller and more cost effective compared to the CS5340/41.
